GY-PL-A700 series
Super large diameter spray injection machine
This machine is suitable for the workpiece injection of large-diameter and low speed .
Large-diameter steel pipe spraying machine
Maximum diameter: 720mm
Spray rate: 10-20m/min
Power: 380V-5kw
Compressed air: 0.6Mpa
GY-PL: This type is applied to the extrusion spray of the outer surface of pipe. While working, coating that been transported to the ring-side by the pump, go through the small hole and been sprouted out to the surface of the workpiece. Through air knives, compressed air pressure blow down coatings on the surface of workpiece, whereas the air consumption is too large. Environmental performance of this machine is lower than spraying machine.
GY-PN-A
Inwall spraying machines
As a leading manufacturer in the field of industrial wet painting, GuYu company provides customers with a complete product range, Products from design, supply, mixing, as well as a single unit in the field of access control to complex large equipment installation. For example, the large equipment is widely used in the plastics industry, wood industry, metal casing and processing industries, and so on.
In order to address the industrial pipe coating for inner wall of the production sector, particularly in the shipbuilding, petroleum industry .After two years of efforts, we have recently developed 3 sizes of pipe wall spray machines, they are: GY-PN-l, GY-PN-12 and GY-PN type.
Characteristics of these three spraying machine are :
First, the wide range of application, it can spray pipes with the diameter ranges from 100mm to 1200mm;
Second, we use airless spraying machine to conveying high pressure coating while coating; as the adhesion of the coating is very strong and not been limited by paint viscosity, this machine can spray high viscosity coating and install a variety of model specifications of nozzles.
Third, in order to prevent nozzle blocked, filter is installed behind the nozzle, which is reliable.
